News by G4RNK North Korea

ACTIVATION OF NORTH KOREA (PRESS RELEASE #1)
On February 28th, DX-World.net broke the news that Dom 3Z9DX had written
permission to operate amateur radio from a VERY wanted DXCC entity.
Today, we can reveal that entity is North Korea (P5).

Dom 3Z9DX explains he has received a further letter from authorities in
Pyongyang inviting him to a final meeting to discuss [and for he to accept]
rules by the North Korean military and the relevant telecommunications
department.

This meeting will take place in December with activity planned for January
or February 2016.

According to P5 telecoms, Dom will be permitted only three bands
(20-15-10) likely using a multiband vertical from a secured place in
Pyongyang with two government supervisors over-looking 24/7.
Activity will last for 5 days.

At the moment this is a solo expedition to the #1 Most wanted entity using
SSB only. He is working hard behind the scenes to get one more op (CW) to
join him.

Updates to follow,
Rob G4RNK

When you need a friend…

Steve M6HOB here. I’m relatively new to amateur radio, having obtained my Foundation Licence a year ago and although I attend the Wednesday club nights, I hadn’t got round to buying any radio kit for my station. I have a very old ICOM 2m rig in my Land-Rover, but it’s not much use for general work with pre-selected frequencies only.

I’m currently studying for my Intermediate licence, and building a Walford Electronics “Berrow” QRP CW transceiver as the obligatory project. The club’s tutors Peter (G4OST) and Paul (M0ZMB) have been really helpful guiding me on the build, especially as it’s a fairly advanced project for the intermediate and a radio novice. Construction stalled once I’d completed the receiver side of the kit, as I hadn’t got an aerial up. Cue a friend and club member Andrew (G0RVM) stepping up and spending his Saturday afternoon to help me set up a 1/2 wave dipole on 30 metres / 10 MHz. Despite the bitter cold, we put up a wooden fence post at one end of my garden, and bolted a 3 metre high steel antenna mast from ScrewFix with an eye bolt at the top to run a cord through. The mast is really sturdy and great value, plus you can potentially stack them and go to 4.5 or 6 metres high, though I’m not sure how much tension one could safely put on the aerial wire at that height without guying the top of the mast.

Andrew kindly lent me a 1:1 balun whilst I await delivery of a new one from a well known supplier in Staines. What a nice chap! 🙂

The other end of the dipole is supported on the apex of my garage roof, which puts the centre conveniently close to my study window, keeping the RG58 feeder fairly short. A few minutes work in the loft to run the RG58 up through the wall and out of the soffit vent, and the job was done!

Andrew also brought along his MFJ antenna analyser, so we could tune up the antenna. The wire hangs about 4m off the ground, rather than at least 7.5 metres for a 1/4 wave, partly because to go any higher would put the wire in the midst of a large oak tree and dense branches. We got it resonant but the impedance of the antenna is 25 ohms at resonance in the band centre. Not great, but workable with an ATU, and it seems to receive well across the band, I heard some CW at +20dB on my FRG100.

Anyway, back to the subject line of the post; it’s brilliant to be able to draw on the expertise, kit and friendship of the club members. Someone’s always ready to lend a hand…

73’s
M6HOB

G4RNK Rob

Hi all from Sunny Spain

Maybe some of you have not been to my website, Lots of links and these link’s also have many links i think it is over 3,000 plus

Can you Gary or Andrew put my website link on the club site

If any one has a website please send me the info so i can add you to the members page on my site

Website info

www.qsl.net/g4rnk/

All the best guy for now enjoy club meeting

de Rob

G4RNK

Trip to IOW and QSO

I am pleased to report a very successful and somewhat impromptue QSO was had on 2M on my trusty handheld (thank you again to Paul!!) whilst on our long weekend to the glorious (or not so weather wise) walklng vacation on the beautiful IOW.

From our bungalow at Seaview, North East of the Island, I was warmly welcomened into the ‘Waterside Net’ transmitting on the island on Sarurday morning at 9am. Sadley I wasn’t able to quickly scribble down call signs as this QSO was totally unexpected however my thanks to Bob, MIke, Elaine and Peter who were on the net and warmly invited me and the any of the club to hook up again if ever we are that way.

My signal reports ranged from 3/5 and 2/4 (S/R) which I thought wasn’t bad for a handheld behind glass and in a low spot which Sea View is albeit on the coast edge and into Sandown for Bob and Shanklin and East Cowes (for all the others) which is approx 8-9 miles maybe more and surprisingly over several large hills (not quite mountains!!).

Funny thing was I told them that I was from Bristol and I think most initially thought they had struck a long DX net but none the less throughly enjoyed it and made the day. Took the radio out walking later that day over high ground near Freshwater and in clear line of sight to channel islands etc but sadely nothing…bizarre that.

Happy days!!
Mark

National Hamfest report

Another very well attended Ham fest this year.

Wanting to arrive early and ‘browse’ (polite word for rummaging through stuff!) the boot sales outside the event hall/s didn’t disappoint. Could have spent a fortune on equipment you understand (better half used a rather less endearing term for it) however resisted. Everything from old radio gear (ex-army) to pcb boards etc. However one noteworthy point; upon searching for good value for money coax I have to say I was disappointed compared to the recent Newbury rally. Quite expensive off the drum prices!

Next stop antenna masts. I wanted to check out the proposed installation for the shack QTH.
Total Mast Solutions offered some interesting ideas for masts in small spaces or in other words stealth possibilities. Demo van was fun….hydraulic pump action through the roof of a VW camper on a par with TV location crews I reckon?

So into the main hall/s (well after coffee first early start up at 4am!). Tried to work systematically around in an orderly fashion however that soon went out the window as I switched to ‘what every caught my eye mode’.
Usual big guns out in all their new equipment splendour should you happen to have circa the odd £10k spare! Namely Kenwood, ICOM etc. I went straight to Yaesu who were smaller and appeared to be taking time to talk to hams on the floor circling the equipment (like sharks I have to add). Showcasing their FTDX 9000D of course way beyond little me and apparently does everything including the housework ….I was however heartened by the reps very growing report on the good old 450D which will be my main shack HF radio. Of course came away with armfuls of literature and the obligatory bag and pen.

Then on to Antennas as you know of particular interest to me. I found Sandpiper Antennas and Marc Foster (no relation to the other Mark Foster whom I also know well from my GB swimming connections!) an interesting browse. Spent time talking to him about bespoke antenna designs, application and would say that it seems bespoke manufacture is on the up. Some good advice about standard 2m/70cms home base set up and on to others for which I spent at least an hour browsing all. These including InnoVAntennas, Mookraker, LAM etc and the like, except the presence of American sales people on the Inno stand sort of through me a bit. Impressive antenna though if like me you have a spare 2 acre plot. One for John M0HFH would have been a captivating discussion with a small ‘home grown’ stand called G4TPH Mag Loop antennas (one on show he had made). Personally John didn’t think the loop (very flimsy) wasn’t a patch on the cobweb design!! Perhaps we ought to really think about developing that aspect of the club to go to these kinds of events??. Anyway met two guys an M6 like me and a 2EO (soon to be me I hope) both from local neighbouring clubs who were interested in him coming to give a talk and demonstrate his system/s – think they intended buying a kit but for best part of £80 we could make it ourselves (couldn’t we John) and by his (the owner) own admission that paid for mostly his time!!.

Paul would have liked to browse the electronics and components stands of which there were many. As I don’t really have an application as yet to solve or contemplate building I sort of skirted them but was stopped by a rather useful application to stream live radio feed to your TV!! Ha …I’ll never get permission for that but Paul might! Disappointed that I didn’t really see any bargain price MFJ analysers for sale – even with show price still dearer than ebay! Plenty buying though.

Couldn’t really depart the show or the main hall without passing by the RSGB stalls although I have to say the stands didn’t really do it for me. Not much on them to draw you in!! Would have liked to have seen more made of the RSGB training stand apart from the two reps who were just sat on an empty desk with Exam Board registration forms. Didn’t really get time to see all the committees there but I did visit the RAYNET group and found that aspect of radio work interesting. I would on a personal level like to look into that myself. Got some contacts so that was useful.

Final stop before being drawn back to the car boot sales was the bring and buy. More buying than bringing! Again rather captivating and a bit like ebay but or real! Was tempted by an old IOCM think it was a 717 or something of that description wanted £250-330 not sure but it had been smoked (think owner confused it with a kipper). Resisted as always and anyway just soaked up the atmosphere of being amongst the hagglers for that and moved back to the car boot and pondered a final whip around the hall but by then getting very busy.

Departed with a new mobile rubber duck antenna (yes I know last of the big spenders!!) for the wouxun …well had to have something and armfuls of magazines and sales literature for us to read at club. Very nearly invested in a duel band mobile antenna for the landy but….as Andrew knows I am still contemplating the set up for that so no having seen any real mounts that can take a decent loading decide against at the show. Watch that space though. Also disappointed I suppose that I didn’t have more ‘bits’ (perhaps a couple of dozen pl259s, BNC’s and the odd length of RG213) but when there isn’t a need or application (just yet) isn’t that just hording!! Bit disappointed that Clarkes and others who I met at Newbury weren’t there but guess wrong part of the country. However enjoyable day out and very glad I went and will go again to others if not to report back to club.

PS. I can always make up for the not having horded stuff this Sunday at the Newbury landy fair!!

Mark Beasley
M6KMJ

Data Modes Lecture

FLDigi

FLDigi and PSK-31

Don’t forget tomorrow night we have a lecture by Paul, M0ZMB, about Data Modes in amateur radio.  So, if you don’t know the difference between PSK, RTTY, Thor or Hellschreiber or your DM-780 from your FLDigi then make sure you come along.

It’s bound to be a fun evening, packed with masses of really cool information!

Andrew
G0RVM

Pizza at Paul’s

Paul's Pizza Palace

It turns out that our chairman has his own pizza oven – how cool is that? 🙂 Paul was exceedingly kind and invited the club around on Sunday for home made pizza and drinks.

Thanks Paul, it was a great afternoon and I would like to say ‘thank you’ on behalf of the club.

Andrew,
G0RVM

G0RVM goes to EU-010

Andrew, G0RVM will be off to Harris in the Outer Hebrides during the first two weeks of August.  He will be operating on HF and will be  happy to work TSGARC members.

He will be operating from:

    • IOTA: EU-010
    • Loc: IO67mu
    • QTH: Horgabost

A visit to Ron Weedon

Ron Weedon

Ron Weedon

Sunday Morning 15th September 2013 Rex (G4RAE) and John (M0hfh) spent an hour practising Morse code before setting off to visit one of the clubs older members Ron Weedon who is 90 this year. Ron was donating some of his redundant radio equipment to the club. Ron invited us to see his “Shack” which was a tiny table in the corner of the bedroom he shares with his wife; a Yaesu 817 linked to a morse key and LDG atu taped to the top. We asked what the RG58 disappearing out of the window was connected too and Ron showed us a commercial all band HF Vertical he had attached to the washing line post; as we talked to Ron it became apparent just how interested in Amateur radio he is, he showed us the latest entry in the log, TF (Iceland) and explained that he had some difficulty reading the operators morse which was at high speed. all together it was an interesting and inspiring morning. Many thanks Ron (G0IWW).